Auversun

Creation date:  6^th of October. 2012

Range of products

Integrations systems fith with monocrystalline MCPP and polycrystalline PCPP photovoltaic panels 

• Module Auvers'tyle II - Power max. 250 Wc

Integration solution for residential.

Setting-up of photovoltaic roof tiles by simply interlocking to rail carrier. Anti-wind breakout safety thanks to profile of the holding rail. Ventilation of low and lateral sides for optimum electric production.

Photovoltaic module	AVG250M60NN
Type of cell	PS monocrystalline type P
Sizes	156 x 156 mm (6 inches)
Module electric characteristics
Number of cells	60
Rating power (Pmpp)	250 Wc
Rating power per m²	151.7 Wc/m²
Tolerance on power	0 / + 3%
Voltage at rating power (Vmpp)	30.24 V
Intensity at rating power (Impp)	8.38 A
Voltage in open circuit (Vco)	37.50 V
Intensity in short circuit (Ico)	8.92 A
Module efficiency	15.17 %
Maximum voltage of the system	1000 V
Influence of temperature
Voltage / temperature	-123.8 mV / °C
Intensity / temperature	3.57 mA / °C
Power / temperature	-0.43 % / °C
Module dimensional characteristics
Length (+/- 2 mm)	1.696 m
Width (+/- 2 mm)	1.007 m
Surface	1.708 m²
Frame thickness	20 mm
Surfacic weight	10,54 kg / m²
Backsheet	black
Connection box	Tyco
Diodes	3 by-pass

• Module Auvers'top - Range power from 240 to 265 Wc
  

Photovoltaic solution for technical and economic integration of agricultural and industrial buildings

• Drainage rail system adaptable to all structures (metal, wood and concrete),
• Suitable for all crawling up to 27m and 1.6m spacing between purlins,
• Fits all pitched roofs from 5 to 50 °,
• Possible overflow of modules on the ridge purlin of 0.3m to install a maximum of roof modules
• Maximum weight of 4.5 kg / m² (excluding module) to simplify the handling of materials
• System without sub-layer with air inlets and outlets for increased ventilation of the modules and therefore an increase of the efficiency by 10% minimum,
• Aluminum profiles, stainless steel screws and patented fastening system for high resistance in time and complete control of expansion stresses.

• Module Auver'slate - Power max. 250 Wc

Photovoltaic monobloc system.

This new tile is made of composite materials "glass microfibre and polyester resin", a high-tech material of the roof to service the I2S system developed by the company Solar Composites.

This new product combines a new generation of cells to obtain an optimum ventilation of modules with a very high efficiency and above 100% recycling factor MRF. The non-conductive material provides both thermal and electrical insulation. This saves the cost for grounding the support of the module.

Photovoltaic module	AVS250M60NN
Type of cell	PS monocrystalline type P
Sizes	156 x 156 mm (6 inches)
Module electric characteristics
Number of cells	60
Rating power (Pmpp)	250 Wc
Rating power per m²	133.8 Wc/m²
Tolerance on power	0 / + 3%
Voltage at rating power (Vmpp)	30.24 V
Intensity at rating power (Impp)	8.38 A
Voltage in open circuit (Vco)	37.5 V
Intensity in short circuit (Ico)	8.92 A
Module efficiency	13.38 %
Maximum voltage of the system	1000 V
Influence of temperature
Voltage / temperature	-123.8 mV / °C
Intensity / temperature	3.57 mA / °C
Power / temperature	-0.43 % / °C
Module dimensional characteristics
Length (+/- 2 mm)	1.800 m
Width (+/- 2 mm)	1.100 m
Surface	1.980 m²
Frame thickness	80 mm
Surfacic weight	20 kg / m²
Backsheet	black
Connection box	Tyco
Diodes	3 by-pass

Sunscreens

The solar screens respond to the problem of integrating solar panels to buildings.

KEY BENEFITS

• Glass slides equipped with photovoltaic cells,
• Ensures the production of electricity,
• All cell technologies are possible,
• Lowers the temperature in buildings by absorbing and reflecting sunlight,
• Provides significant savings in terms of energy consumption,
• Improves productivity by reducing the overheating of buildings,
• Lets in natural light

Candelabra

Solar candelabra were developed to meet the demand of electrically independent lightings for parks and gardens, pedestrian zones, roundabouts and car parks.

PRINCIPLE

A candelabrum completely autonomous: it has its own power generator, renewable indefinitely.

1. The photovoltaic module captures solar energy during the day,
2. The twilight switch allows automatic switching from the dark,
3. The accumulated energy is stored in one or more instantly battery (s) with (s), regulators, in order to ensure a better charge and discharge,
4. Depending on your programming the lamp may remain lit all night or off during determined phases. Optional hybrid operation provides the connection to the network,
5. Optional added services can be integrated with candelabra: motion detector, Internet, other ...

Parking PV shadehouses

Solutions for urban furniture

To meet all your expectations, Auversun has developed a range of solar urban furniture. More and more communities, municipalities and businesses now want to equip themselves with furniture while emphasizing sustainable development. Parking shadehouses are an effective way to protect parked cars from heat, thus reducing CO2 emissions linked to air conditioning and providing some comfort for users. In addition, the electricity generated by the photovoltaic system provides a high return on investment.

Link to supplier's website

Click on logo

Contact

Phone numbers

Tel.: 04 73 90 20 49
Fax : 04 73 14 18 87

Postal address

Zone des Gravanches
Boulevard Louis Chartoire
63000 Clermont-Ferrand